EC2C Series - 5 to 6 Watt DC-DC Converters High Performance 60% Efficiency Pi Input Filter Regulated Outputs Low Ripple and Noise 500 VDC Isolation

				Input Current
Model No.	Input Voltage	Output Voltage	Output Current	No Load	Full Load	Case	Alt Pin Out
EC2C01	5 VDC	5 VDC	1000 mA	60 mA	1700 mA	C	S
EC2C02		12 VDC	470 mA	70 mA	1750 mA
EC2C03		15 VDC	400 mA	70 mA	1800 mA
EC2C04		±12 VDC	±230 mA	130 mA	1700 mA
EC2C05		±15 VDC	190 mA	140 mA	1700 mA
EC2C11	12 VDC	5 VDC	1000 mA	40 mA	690 mA	C	S
EC2C12		12 VDC	470 mA	40 mA	700 mA
EC2C13		15 VDC	400 mA	40 mA	750 mA
EC2C14		±12 VDC	±230 mA	60 mA	710 mA
EC2C15		±15 VDC	190 mA	60 mA	710 mA
EC2C21	24 VDC	5 VDC	1000 mA	20 mA	350 mA	C	S
EC2C22		12 VDC	470 mA	20 mA	340 mA
EC2C23		15 VDC	400 mA	20 mA	360 mA
EC2C24		±12 VDC	±230 mA	35 mA	360 mA
EC2C25		±15 VDC	190 mA	35 mA	360 mA
EC2C31	28 VDC	5 VDC	1000 mA	20 mA	290 mA	C	S
EC2C32		12 VDC	470 mA	20 mA	300 mA
EC2C33		±15 VDC	400 mA	20 mA	310 mA
EC2C34		±12 VDC	±230 mA	25 mA	290 mA
EC2C35		±15 VDC	±190 mA	25 mA	290 mA
EC2C41	48 VDC	5 VDC	1000 mA	14 mA	170 mA	C	S
EC2C42		12 VDC	470 mA	14 mA	170 mA
EC2C43		15 VDC	400 mA	14 mA	180 mA
EC2C44		±12 VDC	±230 mA	20 mA	170 mA
EC2C45		±15 VDC	±190 mA	20 mA	170 mA

Technical Specifications
Input Specifications:
Input voltage range	±10%
Input filter	Pi Type
Output Specifications:
Voltage accuracy	±1.0% max.
Voltage balance, dual output	±0.5% max.
Temperature coefficient, single output	±0.02%/°C
Temperature coefficient, dual output	±0.01%/°C
Ripple and noise, 20MHz BW, single output	50mV p-p max.
Ripple and noise, 20MHz BW, dual output	35mV p-p max.
Short circuit protection	short term
Line regulation	±0.02%
Load regulation	±0.05
	General Specifications:
Efficiency	60%
Isolation voltage	500 VDC min.
Isolation capacitance	80pF
Isolation resistance	109 Ohms
Switching frequency	20kHz min.
Operating temperature range	-25°C to +71°C
Case temperature (plastic case)	95°C max.
Case temperature (copper case)	100°C max.
Cooling	Free-air convection
Storage temperature range	-40°C to +100°C
EMI/RFI	Six sided continuous shield
Dimensions	2 x 2 x 0.4inches (50.8 x 50.8 x 10.2mm)
Case Material:
Standard models	non-conductive black plastic
Suffix "M" models	Black coated copper with non-conductive base

All specifications typical at nominal line, full load and 25°C unless otherwise noted.

Click here to enquire about this product | Amalgen Homepage

Amalgen Technologies Pty Ltd 43 Anderson Road, Mortdale NSW 2223 Australia Phone: +61 2 9570 2855 Fax: +61 2 9580 5128

© 2007 All rights reserved. Amalgen Technologies Pty Ltd.