150W Single Output DC-DC Converter
  • 2:1 input range
  • Low cost, high reliability
  • 1500VAC I/O isolation
  • Built in EMI filter, low ripple noise
  • 100% full load burn-in test
  • Short circuit protection
  • Overload/Voltage protection
  • ISO-9001 manufacturer
  • 1 year warranty

199 x 110 x 50mm

Specifications
DC output volt. adjust: 12V: 11 ~ 16V, 24V: 23 ~ 30V
Line regulation: ± 0.5% max.
Load regulation: ± 0.5% max.
Overload protection: 105% ~ 135% output pulsing mode
Over volt. protection: 130% ~ 165% of output voltage
Withstand voltage: I/P-O/P: 1.5kV, I/P-FG: 1.5kV, O/P-FG: 0.5kV, 1 min.
Isolation resistance: 500VDC 100MW
Operating temp: -10°C ~ +60°C (refer to output derating curve)
Safety standard: 24V and 48V input meet LVD
EMC standard: EN55022 class B, EN61000-4-2, 3, 4, 6, 8
Weight/packing: 0.85kgs/20pcs/1.4CUFT

Type No. Input Output R&N Efficiency P.P.
SD-150B-12 19-36V 12V, 12.5A 120mV 75% 112
SD-150B-24 19-36V 24V, 6.3A 150mV 77% 112
SD-150C-12 36-72V 12V, 12.5A 120mV 77% 112
SD-150C-24 36-72V 24V, 6.3A 150mV 80% 112
SD-150D-12 72-144V 12V, 12.5A 120mV 79% 112
SD-150D-24 72-144V 24V, 6.3A 150mV 82% 112

Click here to enquire about this product | Amalgen Homepage

Amalgen Technologies Pty Ltd
43 Anderson Road,
Mortdale NSW 2223 Australia
Phone: +61 2 9570 2855
Fax: +61 2 9580 5128
 
© 2007 All rights reserved. Amalgen Technologies Pty Ltd.