7001 to 7008 - 24Vdc Nominal DC Battery Back Up/DC UPS Units
 
  • Compact reliable high quality DC backup unit, that requires no extra wiring
  • Regulated Linear power supply for load and charger
  • Smart battery management with temperature compensation
  • Differential battery monitor for a long and predictable battery life
  • Status LEDs and relays
  • LCD Status display and/or RS232 on some models
  • Australian designed and built for extreme conditions, virtually maintenance free
 

AMALGEN DC UPS units are a compact, power supply and battery charger, all in one. The DC is produced by a fully regulated linear power supply that will look after the load and supply charge to the battery. Quality DC power and long battery life is maintained by a smart controller that also allows for a "bump-less" change over. When the AC power is off and the DC is from the batteries, the smart control protects the batteries from being over drained by the load, the DC is turned off before the batteries are drained to the point of damage. This protects the batteries so that they are ready for charging as soon as the AC power is returned.

Two types are available, an Analog Monitored series and a Digital Monitored series. The Analog series has LED status showing, Charger OK, DC available, Battery Volts low, and Check Battery; it also has relay output that advises of Battery fault and Charger OK. The Digital models have LED status showing, DC OK and Battery fault. They also have an LCD that not only indicates status, but also has a Charge Voltage, Charge Current, Load Voltage and Load Current read out. Telemetry on this model is via "open collector" outputs, Differential Battery fault, DC OK, Battery Volts low and charger OK. The Digital Monitored series also has a communication port option.

The 7000 Series has a standard range of units related to battery sizes with 4.5Ah, 7Ah, 17Ah and 40Ah available. Units are 240Vac input, 2 X12V batteries connected in series to give a nominal 24Vdc output (18Vdc.to 28Vdc.) Batteries are housed in their own "tamper proof" compartment and are fused for safety and easy removal.

If a larger size or different Voltage is required AMALGEN can custom manufacture to your requirements.


Model Rating Ah Load Current Max. Dimensions (mm) Backup Amps**
Analog Digital Normal Battery Wide High Deep Weight 4 hr 8 hr
7001 7002 4.5 1A 2A 155 240 112 8 kg 0.90 0.50
7003 7004 7.0 2A 1A 180 240 145 10 kg 1.40 0.78
7005 7006 17.0 4A 6A 196 347 176 20 kg 3.40 1.91
7007 7008 40.0 8A 15A 340 385 210 50 kg 8.00 4.50
* Weight may vary depending on battery manufacturer's specifications. ** These are typical values and users are encouraged to check the battery manufactures specifications.

Functions Analog Models Digital Models
Telemetry Relay output
Charger OK, N/O, N/C
Battery Fault, N/O, N/C
Open Collector Output
Battery Fault, DC Out OK
Battery Volts Low, Charger OK
Status LED Indicators Charger OK, Green
DC Available, Green
Battery Volts Low, Red
Check Battery, Red
DC Output OK, Green
Battery Fault, Red
Communications Options No options available Option A - LCD Display Option or
Option B - RS232 or
Option C - RS 485
7000 Series Click here to download the product manual.

How to choose the right battery size
Valve Regulated Batteries

Click here to enquire about this product | Amalgen Homepage


Amalgen Technologies Pty Ltd
43 Anderson Road,
Mortdale NSW 2223 Australia
Phone: +61 2 9570 2855
Fax: +61 2 9580 5128
 
© 2007 All rights reserved. Amalgen Technologies Pty Ltd.