|
|
|
| ||
| ||
| DIN Rail Mounting Linear Regulated D.C. Power Supply
Models 6415/6416/6417/6418 The Amalgen models 6415, 6416, 6417 and 6418 power supplies have been designed for standard DIN-rail or gear plate mounting. The model 6415 is a dual channel regulated supply with 1 Watt output available from each channel. The model 6416 is a single output model but with higher output power (6 W). The model 6417 is similar to the 6416 but with an adjustable output. The model 6418 has a higher output power again (12 W). All models have power trabsient protection on the inout as a standard feature. The model 6415, by external wiring, can be used in series, parallel or as a bipolar supply. All models have a green L.E.D. for power on indication. Input/output isolation complies with Australian standard AS3108. Models 6416, 6417 and 6418 are field reconfigurable for 120 V AC/240 V AC operation. |
|
 |
| Specifications | |
| Mounting: | DIN-rail or gear plate |
| Termination: | Screw terminals on front |
| Enclosure material: | High impact polycarbonate |
| Output Voltage Regulation: | ± 0.1% No load to full load |
| Ripple: | 4m V P/P at full load |
| Temperature effect: | 0.01% per °C |
| Operating temperature: | -10° - +55°C |
| Storage temperature: | -20° - +70°C |
| Isolation input/output: | 3500 V AC RMS 1 minute |
| Isolation CH1/CH2: | 1000 V AC RMS, 1500 DC |
| Input voltage tolerance: | ± 10% |
| Output power (6415): | 1 Watt per channel |
| Output power (6416, 6417): | 6 Watts (at nominal input) |
| Output power (6418): | 12 Watts (at nominal input) |
| Output protection: | Thermal shutdown on overload |
| Input protection: | M.O.V. transient protection |
| Size (W x H x D): | 52 x 70 x 110 mm |
| Weight: | 0.35 kg |
| Model (1) | Output (2) Volts D.C. |
Output (2) D.C. mA |
Input VA | Weight gm |
| 6415-X00 6415-X11 6415-X22 6415-X44 6415-X04 |
2 x 5V D.C. 2 x 12V D.C. 2 x 15V D.C. 2 x 24V D.C. 5V/24V D.C. |
200mA 50mA 50mA 40mA 200mA/40mA |
4VA 4VA 4VA 4VA 4VA |
300 300 300 300 300 |
| 6416-X0 (3) 6416-X1 (3) 6416-X4 |
5V D.C. 12V D.C. 24V D.C. |
800mA 500mA 250mA |
14VA 14VA 14VA |
450 450 450 |
| 6417-X1 6417-X4 |
6-13V D.C. ADJ 13-28V D.C. ADJ |
500mA (4) 200mA (5) |
14VA 14VA |
450 450 |
| 6418-X0 6418-X4 |
5V D.C. 24V D.C. |
1500mA 500mA |
23VA 23VA |
550 550 |
|
1. X = 3 for 120V A.C. 50/60 Hz, X = 2 for 240V A.C. 50/60 Hz 2. Other ratings available as specials 3. Fitted with external heatsink increasing width to 85mm 4. Derate by 50mA per Volt below 13 Volts output. 5. Derate by 25mA per Volt below 20 Volts output |
| Click here to enquire about this product | Amalgen Homepage |
|
Amalgen Technologies Pty Ltd 43 Anderson Road, Mortdale NSW 2223 Australia Phone: +61 2 9570 2855 Fax: +61 2 9580 5128 |
| © 2007 All rights reserved. Amalgen Technologies Pty Ltd. |