|
|
|
| ||
| ||
| Model K1/112 Isolated Grid Module - Output 1.2kV Isolated to 50kV
Applications:
This power supply uses the proven precision oscillator from the standard 10 watt HP series and is intended to provide X-ray tube grid control up to 1.2kV. The grid can be isolated from ground by up to 50kV, while power input & control remain at ground potential. Higher isolation voltages, and different o/p voltages are also possible; please consult the factory for more details. Options include beam current stabilisation and control when used to drive an extraction grid. |
|
 |
| Electrical Specifications | |
| Input voltage: | 24V DC ±1V at 0.75 maximum. |
| Output voltage: | 120V to + 1200V DC at 3mA. Isolated to 50kV |
| Control: | 0 to +10V gives 0 to +1200V |
| Ripple: | Less than 2% peak to peak, ripple frequency 50kHz |
| Injected ripple: | Less than 3% peak to peak (measured with 100pf load capacitance) |
| Line regulation: | Less than 0.1% for 1V change in 24V |
| Load regulation: | Less than 10% of full scale for 10% to 100% change in load current |
| Temperature co-efficient: | 0.1% per °C |
| Voltage monitor (pin 3): | 0 to 10V represents 0 to 1200V (accuracy ±15%) |
| Operating temperature: | 0°C to +45°C |
| Mechanical Specifications | |
| Dimensions: | 280 x 120 x 60mm |
| Output cables: | 2 off TV50 screened length 1 metre approx. |
| Pin connections: | See K1/112 application notes |
| Click here to enquire about this product | Amalgen Homepage |
|
Amalgen Technologies Pty Ltd 43 Anderson Road, Mortdale NSW 2223 Australia Phone: +61 2 9570 2855 Fax: +61 2 9580 5128 |
| © 2007 All rights reserved. Amalgen Technologies Pty Ltd. |