|
|
|
| ||
| ||
| 5 Volt D.C. 10A Power Supply
Model 3127 The Amalgen Model 3127 DC Regulated power supply is a compact, panel mounting, enclosed single phase input unit. Offering good regulation the power supply is mainly used in the instrumentation industry. The regulator is temperature limited and time dependant current limited. Incorporating a toriodal transformer which offers low weight, small size and the elimination of transformer hum. |
|
 |
| Specifications | |
| Input Volts: | 240 volt 50 Hz (110 volt available) |
| Load Regulation: | Better than 2.5% no load to full load |
| Line Regulation: | Better than 2.5% for input volts 210-250V AC |
| Total Noise: | Less than 20mV R.M.S. |
| Protection: | None. Input fuses should be rated 5 to 10 times full load input current |
| Current Limit: | 7A approx. (14A for 6.5A mode) Output is short circuit protected for models up to 24 volts |
| Ambient Range: | 0° - 55° Celsius |
| Dimensions: | See below |
| Model | Output Volts D.C. |
Output Amps D.C. |
Typical full load input current * |
Weight kg |
| 3127-X1 | 5 | 10.0 | 0.47 | 5.0 |
| X = 0 for 110 Volts 50 Hz, X = 2 for 240 Volts 50 Hz, * 240V Input |
Mounting: For maximum power output, mount with the longest dimension vertical. Do not obstruct airflow. |
| Click here to enquire about this product | Amalgen Homepage |
|
Amalgen Technologies Pty Ltd 43 Anderson Road, Mortdale NSW 2223 Australia Phone: +61 2 9570 2855 Fax: +61 2 9580 5128 |
| © 2007 All rights reserved. Amalgen Technologies Pty Ltd. |