DR-120 - 120 Watt Single Output DIN Rail Power AC switchable input UL508 listed Approvals UL / CUL / TUV / CB / CE Short circuit, overload over voltage & over temp protected Installed on DIN rail TS35 / 7.5 or 15 LED indicator for power on Cooling by free air convection 100% full load burn-in 3 years warranty

Specifications
Input voltage:	88 ~ 132VAC / 176 ~ 264VAC switchable
Output voltage:	Refer to table below
AC inrush current:	Cold start, 20A at 115VAC & 40A at 230VAC
Overload protection:	105% ~ 150% constant current limiting, auto recovery
Setup, rise & hold up time:	500ms, 70ms, 36ms at 230V full load
Withstand time:	I/P ~ O/P: 3KV, I/P ~ FG: 1.5KV, 1 minute
Working temperature:	-10 ~ +45°C @100%, +60°C @ 60% load
Safety standard:	UL508, UL60950-1, TUV EN60950-1 approved
EMC standards	EN55022 class B, EN61000-3-2,3, EN61000-6-2, EN61000-4-2,3,4,5,6,8,11, ENV50204
Connection:	I/P: 3 poles, O/P: 4 poles screw DIN terminal
Dimensions:	65.5mm W x 125.2mm H x 100mm D
Weight:	0.79 kg

Type No.	Output	DC voltage adjustment	Over volts protection	R & N	Efficiency
DR-120-12	12V ±2%, 10A	12 ~ 14V	15 ~ 16.5V	80mV p-p	80%
DR-120-24	24V, ±1%, 5A	24 ~ 28V	30 ~ 36V	80mV p-p	84%
DR-120-48	48V, ±1%, 2.5A	48 ~ 53V	58 ~ 65V	100mV p-p	85%

Click here to enquire about this product | Amalgen Homepage

Amalgen Technologies Pty Ltd 43 Anderson Road, Mortdale NSW 2223 Australia Phone: +61 2 9570 2855 Fax: +61 2 9580 5128

© 2007 All rights reserved. Amalgen Technologies Pty Ltd.