240W Single Output Industrial DIN Rail Power Supply Installed on DIN rail TS35/7.5 or 15 PFC 0.98@115VAC; 0.95@230VAC Full range AC input Low cost, high reliability High efficiency, low working temp. Built in EMI filter, low noise ripple Power on LED indication Compact size, light weight 100% full load burn-in test Short circuit/over load/over voltage/temp. protection Convection cooled Approvals: UL/CUL/TUV/CE 2 years warranty

Specifications
Input voltage:	85 ~ 264VAC; 120 ~ 370VDC
Input frequency:	47 - 63Hz
Inrush current:	Cold start 30A/115V, 60A/230V
Output voltage:	Refer to table below (+10% adjustable)
Overload protection:	105 ~ 150% output constant current limiting
Over voltage protection:	120 ~ 150% of output voltage
Setup, rise, hold up time	1000ms, 60ms, 50ms/230VAC
Withstand voltage:	I/P-O/P:3KV, I/P-FG:1.5KV, 1min.
Working temperature:	-10-55°C @ 100%, 70°C @ 70%
Safety standard:	UL 508, TUV EN60950
EMC Standard:	EN55022 class B, EN61000-3-2, 3, EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204
Connection:	4P/9.5mm pitch screw terminal
Dimensions:	125.5 x 100 x 125.2 mm
Weight/Packing:	0.55 kgs/pcs; 20pcs/14 kgs/1.1CUFT

Type No.	Output	Tol.	R&N	Efficiency	P.P.
DR-240-24	24V, 10A	±1%	80mV	84%
DR-240-48	48V, 5.0A	±1%	150mV	85%

Click here to enquire about this product | Amalgen Homepage

Amalgen Technologies Pty Ltd 43 Anderson Road, Mortdale NSW 2223 Australia Phone: +61 2 9570 2855 Fax: +61 2 9580 5128

© 2007 All rights reserved. Amalgen Technologies Pty Ltd.