DR-30 - 30 Watt Single Output Class II DIN Rail Power Universal AC full range input Approvals UL / CUL / TUV / CB / CE Short circuit, overload & over voltage protected Installed on DIN rail TS35 / 7.5 or 15 Isolation Class II LED indicator for power on Cooling by free air convection 100% full load burn-in 3 years warranty

Specifications
Input voltage:	85 ~ 264VAC; 120 ~ 370VDC
Output voltage:	Refer to table below
AC inrush current:	Cold start, 27A at 115VAC & 36A at 230VAC
Overload protection:	105% ~ 160% constant current limiting, auto recovery
Line/load regulation:	±1.0%
Setup, rise & hold up time:	100ms, 30ms, 60ms at 230V full load
Withstand time:	I/P ~ O/P: 3KV, I/P ~ FG: 1.5KV, 1 minute
Working temperature:	-20 ~ +50°C @100%, +60°C @ 80% load
Safety standard:	UL60950-1, TUV EN60950-1 approved
EMC standards	EN55022 class B, EN61000-3-2,3, EN61000-6-2, EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61204-3
Connection:	I/P: 2 poles, O/P: 4 poles screw DIN terminal
Dimensions:	78mm W x 93mm H x 56mm D
Weight:	0.27 kg

Type No.	Output	DC voltage adjustment	Over Volts protection	R & N	Efficiency
DR-30-5	5V ±2%, 3.0A, 15W	4.75 ~ 5.5 V	5.75 ~ 6.75 V	80mV p-p	74%
DR-30-12	12V, ±1%, 2.0A, 24W	10.8 ~ 13.2 V	13.8 ~ 16.2 V	120mV p-p	81%
DR-30-15	15V, ±1%, 2.0A, 30W	13.5 ~ 16.5 V	17.25 ~ 20.25 V	120mV p-p	82%
DR-30-24	24V, ±1%, 1.5A, 36W	21.6 ~ 26.4 V	27.6 ~ 32.4 V	150mV p-p	83%

Click here to enquire about this product | Amalgen Homepage

Amalgen Technologies Pty Ltd 43 Anderson Road, Mortdale NSW 2223 Australia Phone: +61 2 9570 2855 Fax: +61 2 9580 5128

© 2007 All rights reserved. Amalgen Technologies Pty Ltd.