DR-75 - 75 Watt Single Output DIN Rail Power Universal AC full range input UL508 listed Approvals UL / CUL / TUV / CB / CE Short circuit, overload over voltage & over temp protected Installed on DIN rail TS35 / 7.5 or 15 LED indicator for power on Cooling by free air convection 100% full load burn-in 3 years warranty

Specifications
Input voltage:	85 ~ 264VAC; 120 ~ 370VDC
Output voltage:	Refer to table below
AC inrush current:	Cold start, 30A at 115VAC & 60A at 230VAC
Overload protection:	105% ~ 150% constant current limiting, auto recovery
Over volts protection:	121% ~ 142% rated output voltage
Setup, rise & hold up time:	1000ms, 60ms, 50ms at 230V full load
Withstand time:	I/P ~ O/P: 3KV, I/P ~ FG: 1.5KV, 1 minute
Working temperature:	-10 ~ +45°C @100%, +60°C @ 60% load
Safety standard:	UL508, TUV EN60950-1 approved
EMC standards	EN55022 class B, EN61000-3-2,3, EN61000-6-2, EN61000-4-2,3,4,5,6,8,11, ENV50204
Connection:	I/P: 3 poles, O/P: 4 poles screw DIN terminal
Dimensions:	100mm x 55.5mm x 125.2mm D
Weight:	0.55 kg

Type No.	Output	DC voltage adjustment	R & N	Efficiency
DR-75-12	12V ±2%, 6.3A	12 ~ 14V	100mV p-p	76%
DR-75-24	24V, ±1%, 3.2A	24 ~ 28V	150mV p-p	80%
DR-75-48	48V, ±1%, 1.6A	48 ~ 53V	240mV p-p	81%

Click here to enquire about this product | Amalgen Homepage

Amalgen Technologies Pty Ltd 43 Anderson Road, Mortdale NSW 2223 Australia Phone: +61 2 9570 2855 Fax: +61 2 9580 5128

© 2007 All rights reserved. Amalgen Technologies Pty Ltd.