DRH-120 - 120 Watt Single Output High Input Voltage Input 340 ~ 550VAC single phase UL508 listed Approvals UL / CUL / TUV / CB / CE High efficiency and low dissipation Short circuit, overload over voltage & over temp protected Installed on DIN rail TS35 / 7.5 or 15 Cooling by free air convection 100% full load burn-in 1 year warranty

Specifications
Input voltage:	340 ~ 550VAC single phase
Output voltage:	Refer to table below
AC inrush current:	Cold start, 50A
Overload protection:	105% ~ 160% constant current limiting, auto recovery
Withstand time:	I/P ~ O/P: 3KV, I/P ~ FG: 1.5KV, 1 minute
Working temperature:	-20 ~ +50°C @100%, +50°C @ 50% load
Safety standard:	UL508, UL60950-1, TUV EN60950-1
EMC standards	EN55022 class B, EN61000-3-2,3, EN61000-6-2, EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61204-3
Connection:	I/P: 3 poles, O/P: 4 poles screw DIN terminal
Dimensions:	65.5mm W x 125.2mm H x 100mm D
Weight:	0.75 kg

Type No.	Output	DC voltage adjustment	Over volts protection	R & N	Efficiency
DRH-120-24	24V, ±1%, 5A	24 ~ 28V	30 ~ 36V	80mV p-p	85%
DRH-120-48	48V, ±1%, 2.5A	48 ~ 55V	59 ~ 66V	80mV p-p	86%

Click here to enquire about this product | Amalgen Homepage

Amalgen Technologies Pty Ltd 43 Anderson Road, Mortdale NSW 2223 Australia Phone: +61 2 9570 2855 Fax: +61 2 9580 5128

© 2007 All rights reserved. Amalgen Technologies Pty Ltd.