ELECTROMARK ESM50 - 50 Watt Single Output DIN Rail Power Universal AC full range input Approvals UL / CUL / TUV / CB / CE Short circuit, overload, over voltage & over temp. protected Fixed switching frequency at 100KHz Installed on DIN rail TS35 / 7.5 or 15 LED indicator for power on Cooling by free air convection 100% full load burn-in 3 years warranty
This small compact Switched Mode Regulated Power Supply is ideal for instrumentation applications and switchboard installations. This unit provides very little heat at full current which makes it ideal for enclosurers with little ventilation. This unit is easy to install with all terminals at the top. The input can also take dc allowing it to be used as a dc/dc converter.

Specifications
Input voltage:	85 ~ 264VAC; 120 ~ 370VDC
Output voltage:	Refer to table below
AC inrush current:	Cold start, 30A at 115VAC & 60A at 230VAC
Overload protection:	105% ~ 150% constant current limiting, auto recovery
Setup, rise & hold up time:	800ms, 60ms, 50ms at 230V full load
Withstand time:	I/P ~ O/P: 3KV, I/P ~ FG: 1.5KV, 1 minute
Working temperature:	0 ~ +45°C @100%, -10°C @80%, +50°C @ 80% load
Safety standard:	UL508, TUV EN60950-1 approved
EMC standards	EN55022 class B, EN61000-3-2,3, EN61000-6-2, EN61000-4-2,3,4,5,6,8,11, ENV50204
Connection:	I/P: 3 poles, O/P: 4 poles screw DIN terminal
Dimensions:	78mm W x 93mm H x 67mm D
Weight:	0.31 kg

Type No.	Output	DC voltage adjustment	Over Volts protection	R & N	Efficiency
ESM5005	5V ±2%, 5A	4.75 ~ 5.5 V	5.75 ~ 6.75 V	100mV p-p	72%
ESM5012	12V, ±1%, 3.5A	10.8 ~ 13.2 V	13.8 ~ 16.2 V	200mV p-p	77%
ESM5015	15V, ±1%, 2.8A	13.5 ~ 16.5 V	17.25 ~ 20.25 V	240mV p-p	77%
ESM5024	24V, ±1%, 2A	21.6 ~ 26.4 V	27.6 ~ 32.4 V	480mV p-p	80%

Click here to enquire about this product | Amalgen Homepage

Amalgen Technologies Pty Ltd 43 Anderson Road, Mortdale NSW 2223 Australia Phone: +61 2 9570 2855 Fax: +61 2 9580 5128

© 2007 All rights reserved. Amalgen Technologies Pty Ltd.