100 Watt Single Output Switching Power Supply Low cost - high reliability High efficiency - low working temperature Built-in EMI filter Compact size - light weight 100% full load burn in test Short circuit/overload/overvoltage protected Switchable input voltage 1 year warranty

Specifications
Input Voltage:	88-132/176-264 Vac
Input Frequency:	47 - 63 Hz
Inrush current:	cold start 20 A (115 V), 40 A (230 V)
Output Voltage	refer to table below ± 10% adjustable
Overload protected:	105% - 150% output pulsing mode
Over Voltage protection	115% - 135% output voltage
Setup, rise and hold up time:	1 S, 30 mS and 15 mS (230 V)
Withstand Voltage:	IP - OP 3 Kv, IP - FG 1.5 Kv, 1 min.
Working temperature 5 V and 7.5 V Other voltages	0-45°C (-10°C @ 80%, +60°C @ 50%) 0-50°C (-10°C @ 80%, +60°C @ 60%)
Dimensions:	199 x 98 x 38 mm
Weight:	0.65 kg

Type No.	Output	Ripple & Noise	Efficiency
S-100F-5	5V - 20A	100 mV	76%
S-100F-7.5	7.5V - 13.5A	125 mV	78%
S-100F-12	12V - 8.5A	125 mV	80%
S-100F-15	15V - 6.7A	125 mV	81%
S-100F-24	24V - 4.5A	150 mV	83%
S-100F-48	48V - 2.2A	150 mV	84%

Click here to enquire about this product | Amalgen Homepage

Amalgen Technologies Pty Ltd 43 Anderson Road, Mortdale NSW 2223 Australia Phone: +61 2 9570 2855 Fax: +61 2 9580 5128

© 2007 All rights reserved. Amalgen Technologies Pty Ltd.