150 Watt Single Output Switching Power Supply Low cost - high reliability High efficiency - low working temperature Built-in EMI filter Compact size - light weight 100% full load burn in test Short circuit/overload/overvoltage protected Switchable input voltage 1 year warranty

Specifications
Input Voltage:	88-132/176-264 Vac
Input Frequency:	47 - 63 Hz
Inrush current:	cold start 35 A
Output Voltage	refer to table below ± 10% adjustable
Overload protected:	105% - 150% output foldback limiting
Over Voltage protection	115% - 135% output voltage
Setup, rise and hold up time:	100 mS, 50 mS and 20 mS (230 V)
Withstand Voltage:	IP - OP 3 Kv, IP - FG 1.5 Kv, 1 min.
Working temperature 15 V and 24 V Others	0-50°C (-10°C @ 80%, +60°C @ 60%) 0-30°C (-10°C @ 80%, +50°C @ 100%)
Dimensions:	199 x 110 x 50 mm
Weight:	0.8 kg

Type No.	Output	Ripple & Noise	Efficiency
S-150-5	5V - 30A	150 mV	78%
S-150-7.5	7.5V - 20A	150 mV	80%
S-150-9	9V - 16.7A	180 mV	80%
S-150-12	12V - 12.5A	180 mV	82%
S-150-15	15V - 10A	180 mV	84%
S-150-24	24V - 6.5A	240 mV	85%
S-150-48	48V - 3.2A	240 mV	86%

Click here to enquire about this product | Amalgen Homepage

Amalgen Technologies Pty Ltd 43 Anderson Road, Mortdale NSW 2223 Australia Phone: +61 2 9570 2855 Fax: +61 2 9580 5128

© 2007 All rights reserved. Amalgen Technologies Pty Ltd.