|
|
|
| ||
| ||
| 24 Volt and 48 Volt D.C. Power Supply
Model 2962 The Amalgen 2962 range of power supplies are three phase input unregulated supplies intended mainly for the process control industry. Housed in a rugged steel case with flanges for gear plate mounting, it should be mounted with its longest dimension vertical. Output is via a plug and socket provided at the bottom of the power supply. A maximum of 20A should be used on a single pin. A voltmeter, ammeter and a DC power on L.E.D. are provided on the cover. |
|
 |
| Specifications | |
| Input Volts: | 415 volts 50 Hz, 3 phase ± 5% taps |
| Load regulation: | At nominal input, ± 7% no load to full load |
| Total Noise: | < 1 volt R.M.S. (300 Hz) (Ripple) |
| Protection: | H.R.C. fuses |
| Ambient Range: | 0° - 55° Celsius |
| Meters: | 0-75 volts/0-30 volts, 0-15 amperes/0-30 amperes |
| No volt relay: | 2 normally open contacts rated 240 volts 50 Hz, 3A (resistance), 1.5A (inductive), 24 volts DC, 3A (resistive), 1A (inductive) |
| Dimensions: | See below |
| Model | Output Volts D.C. |
Output Amps D.C. |
Typical full load input current * |
Weight kg |
| 2962A 2962B 2962C |
48 48 24 |
30 15 30 |
2.4 1.2 1.2 |
34 26 29 |
| * 240V Input |
| Click here to enquire about this product | Amalgen Homepage |
|
Amalgen Technologies Pty Ltd 43 Anderson Road, Mortdale NSW 2223 Australia Phone: +61 2 9570 2855 Fax: +61 2 9580 5128 |
| © 2007 All rights reserved. Amalgen Technologies Pty Ltd. |