|
|
|
| ||
| ||
| 48 Volt DC, 50A - D.C. Power Supply, 24 Volt DC, 75A - D.C. Power Supply
Model 4130 The Amalgen Model 4130 D.C. power supply is a three phase input unregulated supply intended mainly for the process control industry. Housed in a rugged steel case with bottom flanges for easy mounting to the floor of equipment cabinets, it should be mounted such that the unit has reasonable ventilation on front, back and sides. Input and output connections are provided on terminals accesible by removing the top mesh cover. A no volts relay is provided with connections on the same rail as the input and output terminals. A voltmeter, ammeter and a DC power on light are provided on the cover. |
|
 |
| Specifications | |
| Input Volts: | 415 volts 50 Hz, 3 phase ± 5% taps |
| Load regulation: | At nominal input, ± 7% no load to full load |
| Total Noise: | < 1 volt R.M.S. (300 Hz) |
| Protection: | H.R.C. fuses |
| Ambient Range: | 0° - 55° Celsius |
| Meters: | 0-30 volts/0-75 volts, 0-100 amperes |
| No volt relay: | 2 normally open contacts rated 240 volts 50 Hz, 3A (resistance), 1.5A (inductive), 24 volts DC, 3A (resistive), 1A (inductive) |
| Dimensions: | See below |
| Model | Output Volts D.C. |
Output Amps D.C. |
Typical full load input current * |
Weight kg |
| 4130A 4130B |
48 24 |
50 75 |
4.0A 3.0A |
56 65 |
| * 240V Input |
| Click here to enquire about this product | Amalgen Homepage |
|
Amalgen Technologies Pty Ltd 43 Anderson Road, Mortdale NSW 2223 Australia Phone: +61 2 9570 2855 Fax: +61 2 9580 5128 |
| © 2007 All rights reserved. Amalgen Technologies Pty Ltd. |