ELECTROMARK UPS
True On-Line UPS - MHC Series 500VA to 3000 VA

The MHC Series UPS is an advanced true on-line, double conversion UPS system with Intelligent Microprocessor control. Generator compatibility is one important advantage for certain power supply conditions and RS232 communication advanced design make it compatible for sophisticated monitoring software. The 2KVA and 3KVA models have better power security through 'Redundant' features and also have an internal SNMP slot option.

 
  • Intelligent microprocessor controlled true online
    Providing no-break protection for critical applications
  • Double conversion and pure sinewave waveform output
    The cleanest, most compatible AC output for computer systems
  • 50KHz High frequency operation
    Compact size, lighter weight for decreased shipping costs
  • Near unity input power factor (>0.95)
    Saving input current by 1/3
  • Superior output voltage regulation
    Eliminating unnecessary battery discharges for violent voltage fluctuations
  • High efficiency (> 85%)
    High energy efficiency reducing operating costs
  • Long backup time option
    Internal and external battery capability plug-in external battery packs
  • RS232 interface and SNMP solutions
    Available for most operating systems and Novell environments

True On-Line UPS
Model Online MHC 500 MHC 700 MHC 1000 MHC 2000 MHC 3000
Output VA Rating 500VA 700VA 1000VA 2000VA 3000VA
Wattage(100V / 115V / 230V) 350W 490W / 450W 700W 1400W 2000W
Current (100V / 115V / 230V) 5A / 2.2A 6.4A / 3A 9.1A / 4.3A 18.2A / 8.7A 27.3A / 13A
Voltage 100, 110, 120V / 220, 230, 240V +/- 2%
Frequency 50/60 HZ Auto Select
Wave form Pure Sinewave
Harmonic Distortion Less than 3% at full load
Input Voltage 80 - 145V / 160 - 275V
Frequency 45 - 65Hz Auto Select
Runtime Full Load 15min 5-7 min
Half Load 45min 15 min

Transfer Time

INV to Bypass / Bypass to INV Less than 4 msec. (2 msec. minimum) / zero cross transfer
Power Failure / Recovery 0 msec to or from battery
Battery Type (lead acid maintenance free) 12v / 7AH
DC Voltage 24VDC 36VDC 72VDC 96VDC
Recharge Time 5 - 8 hours
Recharge Current 1.5A max
Efficiency AC to AC 85% min
Audible Noise   <40dBA <50 dBA
Indicators LED Display LINE, INV, BAT, BYPASS, FAULT, BAT/LOAD LEVEL
Auto Restart   Yes
DC Start-up   Yes
Protection Overload >110% of full load with 15-20 sec. delay, 150% immediately
Over / Under Voltage at I/P or O/P Inverter shutdown protection
Phone Jack RJ-11/ RJ-45
Short Circuit Shut down and wont transfer to bypass output, will work normally again when short circuit is removed
Approved EMC/LVD (230V, 50Hz) EN59001-2/EN50091-1
C-TICK (240V, 50)Hz) AS-NZS 3548
Safety TUV GS Mark, EN50091-1-1, UL1778, UL2601-1, CUL
USA FCC (120V, 60Hz) FCC PART 15
CNS BSM (110V, 60Hz) CNS 13438
IMMUNITY
(120V / 100V / 100V / 50 / 60Hz)
IEEE 597 CLASS A
Computer Interface LAN/RS232 Interface Mains fail, battery low and remote shutdown UPS/R232 communication
Mechanical Dimensions (W x H x D)mm 140 x 190 x 440 190 x 320 x 500
Net / Gross Weight (kg) 12.3 / 13.8 14.8 / 16.3 32.4 / 36.4 38.2 / 42.2
Environment Temperature 0*C - 40* C
Humidity 0 - 95% Non-Condensing
*Specifications subject to change without prior notice.

Click here to enquire about this product | Amalgen Homepage


Amalgen Technologies Pty Ltd
43 Anderson Road,
Mortdale NSW 2223 Australia
Phone: +61 2 9570 2855
Fax: +61 2 9580 5128
 
© 2007 All rights reserved. Amalgen Technologies Pty Ltd.