ELECTROMARK UPS
Smart Line Interactive UPS - MT Series 400VA to 3200 VA

The MT Series UPS is an advanced true sinewave line-interactive UPS system which is designed to prevent any spike, sags and blackout from reaching your sensitive equipment.

Under normal power conditions the UPS filters out all small fluctuations. During power failure, the unit employs its internal maintenance-free batteries to supply back-up power without any interruption. The UPS is equipped with many features, which make both your equipment and UPS more reliable.

 
  • Line-interactive Charger and Bi-directional Inverter
    The highest performance for protection of frequent brown out
  • Microprocessor Based Design
    Digital UPS control and automatic 50/60Hz frequency select
  • Pure Sine Waveform Output
    The cleanest, most compatible AC output for computer systems
  • Automatic Voltage Regulation (AVR)
    Provides stable power and true brownout and over voltage correction
  • Intelligent Boost and Buck
    Additional protection for an extended AC voltage window
  • Battery Diagnosis
    Self testing for limiting operation, assuring quality and longer life of battery
  • RS232 Communication
    Compatible for sophisticated monitoring software.

Smart Line Interactive UPS
Model   MT400 MT600 MT700 MT1000 MT1400 MT1500 MT2000 MT2500 MT3200
Output VA Rating 400VA 600VA 700VA 1000VA 1400VA 1500VA 2000VA 2500VA 3200VA
Wattage 260W 400W 470W 670W 950W 1000W 1200W 1500W 2000W
Current (100V / 115V / 230V) 4A / 3.5A / 1.7A 6A / 5.2A / 6A - / - / 3A 10A / 8.7A / 4.3A 14A / 12.1A / 6A - / - / 6.5A - / - / 8.7A - / - / 10.9A - / - / 13.9A
Voltage (Back up) 100V/115V/230V+/-6V 230V +/-6V
Frequency 50/60Hz Auto Select
Wave Form Pure Sinewave
Input Voltage (100V / 115V / 230V) 78V-127V/88V-141V/171V-278V
Frequency 45-65Hz Auto Select
Boost Yes
Buck Yes
Runtime Full Load 12min. 8min. 8min. 5min.
Transfer Time Typical 5msec. 5msec. 5msec. 5msec.
Battery DC Voltage 24VDC 24VDC 24VDC 36VDC 48VDC 48VDC 60VDC 36VDC * 2sets 48VDC * 2sets
Type (lead acid maintenance free) 12V/7AH
Recharge Time 8 Hours
Test Auto or Test Key
Efficiency AC to AC >95%
Audible Noise At one meter <45dBA
LED Display UPS Status LINE, BAT, AVR, BAT-WEAK/LOW BAT
Load Status 20%, 50%, 100%, OVER-LOAD/FAULT
Audible Alarm   Yes
Auto Restart   Yes
DC Start-up   Yes
Protection Overload Yes
Over Voltage Yes
Approved EMC/LVD (230V, 50Hz) EN50091-2/EN50091-1
C-TICK (240V, 50)Hz) AS-NZS 3548
Safety TUV GS Mark, EN50091-1-1, UL 1778, UL, KETI
USA FCC (120V, 60Hz) FCC PART 15
CNS BSM (110V, 60Hz) CNS 13438
IMMUNITY
(120V / 100V / 100V / 50 / 60Hz)
IEEE 597 CLASS A
Computer
Interface
RS232/LAN Interface Mains fail, battery low and remote shutdown UPS/RS232 communication
Mechanical Dimensions (W x H x D) (mm) 120 x 160 x 360 120 x 160 x 360 120 x 160 x 360 120 x 200 x 450 120 x 200 x 450 160 x 200 x 450 160 x 200 x 450 160 x 290 x 530
Weight w/Battery (kg) N.W./G.W. 13.3 / 14.5 13.3 / 14.5 13.3 / 14.5 19.5 / 21.5 22.6 / 24.6 22.6 / 24.6 26.2 / 28.7 36.2 / 38.4 42.7 / 44.8
Environment Temperature 0*C-40*C
Humidity 0-95% Non-Condensing
*Specifications subject to change without prior notice.

Click here to enquire about this product | Amalgen Homepage


Amalgen Technologies Pty Ltd
43 Anderson Road,
Mortdale NSW 2223 Australia
Phone: +61 2 9570 2855
Fax: +61 2 9580 5128
 
© 2007 All rights reserved. Amalgen Technologies Pty Ltd.