Amalgen Technologies : Surge Suppression

Aegis Specifications

Application	AEGIS-HW	AEGIS-PR	AEGIS+
	3 Wire Grounded System	2 Wire Ungrounded System	1, 2, and 3 Pole Systems
Input Voltage, single phase	120, 220, 240 VAC, single phase	120, 220, 240 VAC	120, 208, 240, 400, 480, 600 V; Wye, Delta, and International Systems
Amperage	3, 5, 10, 15 Amps	15 Amps	20, 30, 50, 75, 100 Amps
Frequency	50/60 Hz	50/60 Hz	50/60 Hz
Protection Modes	L-N, L-G, N-G	L-N, L-G, N-G	L-N, L-G, and N-G modes (Wye system);L-L and L-G (Delta System)
MCOV	150, 275 V	150, 275 V	150, 275, 320, 420 V
Noise Attenuation:
Normal Mode:	85 dB @ 100 kHz	75 dB @ 100 kHz	65 dB @ 100 kHz
Common Mode:	50 dB @ 5 MHz	50 dB @ 5 MHz	40 dB from 60 kHz to 5 MHz
Filter Bandwidth	10 kHz to 50 MHz	10 kHz to 50 MHz	10 kHz to 50 MHz
Total Peak Surge Current	39,000 Amps per phase	39,000 Amps per phase	80,000 Amps per phase
Operating Temperature	-40 to +50 degrees C	-40 to +50 degrees C	-40 to +65 degrees C
Response Time	Less than 1 nanosecond	Less than 1 nanosecond	Less than 1 nanosecond
Options	Form C relay contacts	Form C relay contacts	Form C relay contacts; NEMA 3R/4X Container; Disconnect Switch; 40 kA or 160 kA
Agency Approvals	UL 1449, UL 1283, CE, CSA	UL 1363, UL 1449, UL 1283, UL 497A, CSA	CE (pending), CSA (pending), UL 1449 (pending)

Amalgen Technologies Pty Ltd
43 Anderson Road,
Mortdale NSW 2223 Australia
Phone: +61 2 9570 2855
Fax: +61 2 9580 5128