|
|
|
| ||
| ||
|
AEGIS Single Phase Filters
|
| Specifications | |
| Input Voltages | 110/115/120 Volts or 220/230/240 Volts Single Phase 50/60 Hz |
| Current Capacity | 3, 5, 10, and 15 Amperes |
| Protection Modes | L-N, L-G, N-G |
| Max Cont. Overvoltage | 150, 275 Volts |
| Noise Attenuation Normal Mode Common Mode |
85 dB at 100 kHz 50 dB at 5 MHz |
| Filter Bandwidth | 10 kHz to 50 MHz |
| Total Peak Surge Current | 39,000 Amperes |
| Let Through Voltages L-N Category A3 Ringwave Category A3 Ringwave Category B3 Combination (Impulse) Wave |
8 Volts (6000 Volts 200 Amperes) * 8 Volts (6000 Volts 500 Amperes) * 112Volts (6000 Volts 3000 Amperes * |
| Operating Temperature | -40 to +50 Deg. Celsius |
| Response Time | Less than 1 nanosecond |
| Protection | Fuse/Breaker - inline |
| Case Style | DIN-rail mounting/surface mounting |
| Dimensions | 110 x 71 x 109 |
| Options (on special order) | Flange style "H" case Monitoring contacts |
| * Based on ANSI / IEEE C62.41,1991 and C62.45,1992 | |
|
Ordering Guidelines
|
| Click here to enquire about this product | Amalgen Homepage |
|
Amalgen Technologies Pty Ltd 43 Anderson Road, Mortdale NSW 2223 Australia Phone: +61 2 9570 2855 Fax: +61 2 9580 5128 |
| © 2007 All rights reserved. Amalgen Technologies Pty Ltd. |
